- The machine is standard designed and constructed for Horizontal and Vertical boring units.
- The 42 vertical drills, drill head can be adjust to any degree position for X or Y axis combination construction drill.
- The machine is easy to operate. Simply press the foot switch and entire horizontal and vertical boring operations can be accomplished quickly.
- Vertical boring for drilling at longitudinal and cross directions.
- The vertical boring units can be adjusted up & down and right & left. Readouts are provided for accurate indication of adjustment.
- An emergency switch is provided on the top beam, allowing the operator to stop the machine conveniently.
- The panel clamp is adjustable at any position.
- Square slide way for vertical boring unit, providing maximum rigidity and stability for boning operations.
|
| SPECIFICATION |
BR-0042B
|
| No. of Ver. Boring Units |
2x21 Bits
|
| No. or Hor. Boring Units |
~
|
| Max. Working Size (W x L) |
23-1/2" x 48"
|
| Drill Between Center |
32 MM
|
| Drill Bit Type |
7/16"x 14UNC
|
| Min. Dis. Between Ver. Heads |
5-1/2"
|
| Max. Boring Stroke |
3"
|
| No. of Ver Boring Head Spindles |
42
|
| No. of Hor Boring Head Spindles |
~
|
| Spindle Speed (RPM) |
3400
|
| Ver Boring Head Drive Motor |
2 HP x 2
|
| Hor Boring Head Drive Motor |
~
|
| N.W. |
1700 LBS
|
| G.W. |
2100 LBS
|
|
|
|
